Configuration d'un routeur extrême d'aéroport pour un proxy DNS intelligent
Les instructions de configuration suivantes ne sont nécessaires qu'une seule fois. Une fois la configuration initiale terminée, vous n'aurez plus besoin de suivre les mêmes étapes à tout moment. Votre connexion fonctionnera automatiquement *à tout moment !
IMPORTANT : Si votre Airport Extreme ou Time Capsule est en "Bridge Mode", vous devez changer le DNS sur le routeur auquel cet aéroport est connecté.
1. Open Airport Admin Utility.
2. Click on Internet Icon on the top selections.
3. Fill in DNS Server fields with the following Smart DNS Proxy IPs in LEFT ana RIGHT DNS sections.
The list of IP addresses of our DNS severs can be found on our DNS Server List here: https://www.smartdnsproxy.com/Servers. Use the closest DNS servers to your physical location. Select the closest server to your physical location as Primary. Then select the 2nd closest server to your physical location as Secondary server.
et cliquez sur le bouton "Mise à jour".
Attention
Make sure to RESTART your Router!
* Remember whenever your PC/Router IP changes, our service will stop working for you. You will need to LOG INTO Smart DNS Proxy and UPDATE your IP address so that our system could check your IP address and add your new IP to our database. Then, you will be able to continue using our service. If this is the first time you set up, we also suggest that you log in with your PC to our site from the same Wired/Wireless network to show our system your IP address.